Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 112,298,152
Arbitrary Lagrangian-Eulerian formulations for cutting pattern generation of tensile membrane structures
Tác giả hoặc Nhóm tác giả:
Quang Hieu Bui, Masaya Kawabata, Vinh Phu Nguyen, My Pham
Nơi đăng:
Journal of Asian Architecture and Building Engineering;
S
ố:
2020;
Từ->đến trang
: 1-11;
Năm:
2020
Lĩnh vực:
Kỹ thuật;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
An application of Arbitrary Lagrangian-Eulerian (ALE) method is used to generate the cutting pattern shapes of membrane structures. The initial patterning panels are selected as the projection of three-dimensional (3D) membrane panels and are assumed as the reference configuration. While the Lagrangian displacements define the forced displacements from this configuration to the 3D configuration, the Eulerian terms describe the motion from this reference configuration to the current patterning panels. The cutting pattern panels can be determined by this process considering the effect of prescribed pre-stress and material properties. Several examples are performed to point out the effectiveness of the proposed method on simplifying the cutting pattern process and the reduction in the stress deviation from the intended pre-stress.
ABSTRACT
An application of Arbitrary Lagrangian-Eulerian (ALE) method is used to generate the cutting pattern shapes of membrane structures. The initial patterning panels are selected as the projection of three-dimensional (3D) membrane panels and are assumed as the reference configuration. While the Lagrangian displacements define the forced displacements from this configuration to the 3D configuration, the Eulerian terms describe the motion from this reference configuration to the current patterning panels. The cutting pattern panels can be determined by this process considering the effect of prescribed pre-stress and material properties. Several examples are performed to point out the effectiveness of the proposed method on simplifying the cutting pattern process and the reduction in the stress deviation from the intended pre-stress.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn