Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 109,889,548
Relaxor characteristics of PSLZT-BMT-based ferroelectric material ceramics
Tác giả hoặc Nhóm tác giả:
Nguyen Van Thinha,c, Le Dai Vuongb,*, Do Viet Ona , Truong Van Chuonga , Le Vu Truong Sond , Trinh Ngoc Datd , Le Van Thanh Sond and Vo Thanh Tunga
Nơi đăng:
Journal of Ceramic Processing Research.;
S
ố:
Vol. 24, No. 3;
Từ->đến trang
: 478~485;
Năm:
2023
Lĩnh vực:
Khoa học công nghệ;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
(1-x)[(Pb0.94Sr0.05La0.01)(Zr0.54Ti0.46)0.9975O3]-x[Bi(Mn1/2Ti1/2)O3] (PSLZT-BMT) ferroelectric material ceramics with x in the range of 0-0.05 mol were successfully synthesized following the conventional solid-phase route. The materials were thoroughly investigated to study their structural phase, microstructure, ferro-piezoelectric characteristics, and dielectric behavior. The experimental results show that the density of the samples decreased from 7.75 to 7.58 g/cm3 , and the relative density decreased in the range of 98.48%-96.28%. However, with increasing contents of BMT, the dielectric and ferroelectric properties of PSLZT-BMT ceramics tend to decrease, specifically the maximum dielectric constant (εmax) of PSLZT-BMT decreased in the range of 23579-9991 and the residual polarization (Pr) decreases in the range of 22.54-7.87 µC/cm2 when the doping content increased in the range of 0.0-0.05 mol. The diffusivity values (γ) of the PSLZT-BMT material are 1.74, 1.78, 1.82, 1.84, 1.79, and 1.77 when the doping content x varies as 0.0, 0.01, 0.02, 0.03, 0.04, and 0.05 mol, respectively, which is characteristic of relaxor ferroelectric materials. Besides, the Tm, TB, TC-W, and C values depend on BMT concentration, and the trend decreases
ABSTRACT
(1-x)[(Pb0.94Sr0.05La0.01)(Zr0.54Ti0.46)0.9975O3]-x[Bi(Mn1/2Ti1/2)O3] (PSLZT-BMT) ferroelectric material ceramics with x in the range of 0-0.05 mol were successfully synthesized following the conventional solid-phase route. The materials were thoroughly investigated to study their structural phase, microstructure, ferro-piezoelectric characteristics, and dielectric behavior. The experimental results show that the density of the samples decreased from 7.75 to 7.58 g/cm3 , and the relative density decreased in the range of 98.48%-96.28%. However, with increasing contents of BMT, the dielectric and ferroelectric properties of PSLZT-BMT ceramics tend to decrease, specifically the maximum dielectric constant (εmax) of PSLZT-BMT decreased in the range of 23579-9991 and the residual polarization (Pr) decreases in the range of 22.54-7.87 µC/cm2 when the doping content increased in the range of 0.0-0.05 mol. The diffusivity values (γ) of the PSLZT-BMT material are 1.74, 1.78, 1.82, 1.84, 1.79, and 1.77 when the doping content x varies as 0.0, 0.01, 0.02, 0.03, 0.04, and 0.05 mol, respectively, which is characteristic of relaxor ferroelectric materials. Besides, the Tm, TB, TC-W, and C values depend on BMT concentration, and the trend decreases
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn