Thông tin chung
  English
  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác
  Tài liệu tham khảo
  Hiệu chỉnh
 
Số người truy cập: 107,061,908

 Physical Properties of Carboxymethyl Cellulose from Palm Bunch and Bagasse AgriculturalWastes: E ffect of Delignification with Hydrogen Peroxide
Tác giả hoặc Nhóm tác giả: Rungsiri Suriyatem; Nichaya Noikang; Tamolwan Kankam; Kittisak Jantanasakulwong; Noppol Leksawasdi; Yuthana Phimolsiripol; Chayatip Insomphun; Phisit Seesuriyachan; Thanongsak Chaiyaso; Pensak Jantrawut; Sarana Rose Somman; Thi Minh Phuong Ngo; Pornchai Rachtanapun
Nơi đăng: Polymers, (SCIE - Q1); Số: 12, 1505; doi:10.3390/polym12071505;Từ->đến trang: 1-16;Năm: 2020
Lĩnh vực: Chưa xác định; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
The aim of this work was to synthesize carboxymethyl cellulose (CMC) and produce CMC films from the cellulose of palm bunch and bagasse agricultural waste. The effect of various amounts of H2O2 (0–40% v/v) during delignification on the properties of cellulose, CMC, and CMC films was studied. As the H2O2 content increased, yield and the lignin content of the cellulose from palm bunch and bagasse decreased, whereas lightness (L*) and whiteness index (WI) increased. FTIR confirmed the substitution of a carboxymethyl group on the cellulose structure. A higher degree of substitution of CMC from both sources was found when 20%–30% H2O2 was employed. The trend in the L* and WI values of each CMC and CMC film was related to those values in their respective cellulose. Bleaching each cellulose with 20% H2O2 provided the cellulose with the highest viscosity and the CMC films with the greatest mechanical (higher tensile strength and elongation at break) and soluble attributes, but the lowest water vapor barrier. This evidence indicates that cellulose delignification with H2O2 has a strong effect on the appearance and physical properties of both CMCs.
ABSTRACT
The aim of this work was to synthesize carboxymethyl cellulose (CMC) and produce CMC films from the cellulose of palm bunch and bagasse agricultural waste. The effect of various amounts of H2O2 (0–40% v/v) during delignification on the properties of cellulose, CMC, and CMC films was studied. As the H2O2 content increased, yield and the lignin content of the cellulose from palm bunch and bagasse decreased, whereas lightness (L*) and whiteness index (WI) increased. FTIR confirmed the substitution of a carboxymethyl group on the cellulose structure. A higher degree of substitution of CMC from both sources was found when 20%–30% H2O2 was employed. The trend in the L* and WI values of each CMC and CMC film was related to those values in their respective cellulose. Bleaching each cellulose with 20% H2O2 provided the cellulose with the highest viscosity and the CMC films with the greatest mechanical (higher tensile strength and elongation at break) and soluble attributes, but the lowest water vapor barrier. This evidence indicates that cellulose delignification with H2O2 has a strong effect on the appearance and physical properties of both CMCs.
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn