Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 107,320,435
DEVELOPMENT OF ANALYTICAL MODELS FOR PREDICTING THE FLEXURAL BEHAVIOUR OF ENGINEERED CEMENTITIOUS COMPOSITES – HIGH STRENGTH STEEL COMPOSITE BEAMS
Tác giả hoặc Nhóm tác giả:
Cong‐Luyen Nguyen, Chi‐King Lee
Nơi đăng:
Advanced Steel Construction;
S
ố:
19;
Từ->đến trang
: 197-208;
Năm:
2023
Lĩnh vực:
Chưa xác định;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
ABSTRACT
This paper presents the results of three-dimensional (3D) finite element (FE) and analytical models on the prediction of the flexural behaviour of composite beams comprising high strength steel (HSS) I-section and Engineered Cementitious Composite (ECC) slab. In the FE approach, 108 composite beam models which cover a wide range of key parameters including HSS grade, ECC compressive strength, HSS section depth, ECC slab thickness, ECC slab width were generated and analysed. The flexural strength of these composite beam models was subsequently employed to validate the accuracies of some commonly used flexural strength prediction methods that are originally based on the rigid plastic analysis (RPA). It was found that these methods generally underpredicted the flexural strength of the ECC-HSS composite beams. Hence, a simple analytical model was proposed, and validation results of its accuracy showed that this simple analytical model produced more accurate predictions than the RPA methods. In order to allow designers to obtain the load-deflection curves of the beams, a full analytical model which is based on strain compatibility and force equilibrium was also developed. Validations against both FE model and test results showed that this full analytical model produced the most accurate flexural strength predictions.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn