Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 107,389,063
The behaviour of masonry walls subjected to fire: Modelling and parametrical studies in the case of hollow burnt-clay bricks
Tác giả hoặc Nhóm tác giả:
Thê-Duong Nguyen
, Fekri Meftah, Rabih Chammas, Ahmed Mebarki
Nơi đăng:
Fire Safety Journal (IF = 3.78, Elsevier);
S
ố:
44;
Từ->đến trang
: 629-641;
Năm:
2009
Lĩnh vực:
Kỹ thuật;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
A thermo-mechanical model is adopted in order to investigate the fire behaviour of clay masonry walls. In this analysis, conductive, convective and radiative thermal transfers are considered together with local energy consumption due to phase changes. These latter are essentially initiated by both the vaporisation of adsorbed water and the chemical transformation of clay under rising temperatures. Therefore, experimental tests at both the material scale and the brick scale are performed in order to identify the parameters that characterise the thermo-hygral behaviour of clay. For this purpose, numerical simulations are carried out on the experimentally tested hollow bricks in order to determine by back analysis these material parameters. The thermal model being validated, the thermo-mechanical behaviour of a masonry wall subjected to fire, is thereafter investigated by adopting a full three-dimensional finite-element analysis. Numerical simulations results are compared to the experimentally measured ones in terms of both temperature and out-of plane displacement fields. In this analysis, it is shown that a non-linear elastic behaviour for bricks and mortar with temperature-dependent mechanical parameters is sufficient to retrieve the overall behaviour of thin masonry walls. Finally, a parametric study provides the influence of each material parameter on the fire behaviour of the partition walls.
ABSTRACT
[
07-nguyentheduong2009_personal_copy.pdf
]
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn