Thông tin chung
  English
  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác
  Tài liệu tham khảo
  Hiệu chỉnh
 
Số người truy cập: 107,035,230

 On the Influence of the Vertical Earthquake Component on Structural Responses of High-Rise Buildings Isolated with Double Friction Pendulum Bearings
Tác giả hoặc Nhóm tác giả: Phuong Hoa Hoang, Hoang Nam Phan, Van Nam Nguyen
Nơi đăng: Applied Sciences (SCIE Q2); Số: 11(09);Từ->đến trang: 3809;Năm: 2021
Lĩnh vực: Kỹ thuật; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
The double friction pendulum (DFP) bearing is adapted from the well-known single friction pendulum (SFP) bearing. This type of bearings has been widely used for structural vibration controls. The main advantage of the DFP is its capacity to accommodate larger displacements as compared with the SFP one. This paper aims to assess the effect of the vertical earthquake component on the seismic behaviour of a base-isolated high-rise building. In this respect, the mathematical model of the building subjected to earthquake excitations with an implementation of a DFP bearing system is established. The model presented herein considers earthquake excitations in horizontal (X and Y) and vertical (Z) directions. A series model of two friction elements is presented for the bearing, where the friction load of the bearing surface is governed by a modified Bouc-Wen model, which is dependent on the sliding velocity and the contact pressure. The numerical results of an example of a base-isolated 9-story steel building subjected to near-source and far-field earthquakes show the high effectiveness of the bearing system in reduction of the seismic response of the building, especially in the near-source region, as well as exhibit considerable effectiveness of the vertical earthquake component on the bearing and structural behaviour.
ABSTRACT
The double friction pendulum (DFP) bearing is adapted from the well-known single friction pendulum (SFP) bearing. This type of bearings has been widely used for structural vibration controls. The main advantage of the DFP is its capacity to accommodate larger displacements as compared with the SFP one. This paper aims to assess the effect of the vertical earthquake component on the seismic behaviour of a base-isolated high-rise building. In this respect, the mathematical model of the building subjected to earthquake excitations with an implementation of a DFP bearing system is established. The model presented herein considers earthquake excitations in horizontal (X and Y) and vertical (Z) directions. A series model of two friction elements is presented for the bearing, where the friction load of the bearing surface is governed by a modified Bouc-Wen model, which is dependent on the sliding velocity and the contact pressure. The numerical results of an example of a base-isolated 9-story steel building subjected to near-source and far-field earthquakes show the high effectiveness of the bearing system in reduction of the seismic response of the building, especially in the near-source region, as well as exhibit considerable effectiveness of the vertical earthquake component on the bearing and structural behaviour.
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn