Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 112,298,152
Fundamental
study on Joint Strength of FRP plates using FRP bolt and Adhesive
Tác giả hoặc Nhóm tác giả:
Phan Viet Nhut, Yukihiro MATSUMOTO, Yasuo KITANE, and Kunitaro HASHIMOTO
Nơi đăng:
Proceeding of the 19th International Summer Symposium, published by Japan Society of Civil Engineers, ISSN 1345-8507;
S
ố:
Semtember 2017;
Từ->đến trang
: 5-6;
Năm:
2017
Lĩnh vực:
Kỹ thuật;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
ABSTRACT
Pultruded FRPs have been increasingly used in civil infrastructure applications due to advanced properties such as high specific strength, lightweight and especially high corrosion resistance. In highly corrosive environment such as chemical and acid environment where metallic by-products are prone to corrosion, FRP bolts combining with adhesive bonding proved to be an effective solution to increase the durability as well as serviceability of joints in FRP structures. The use of adhesive bonding in addition to FRP bolts not only decreases the structure’s weight and limits the impacts of aggressive environment but also increases the ultimate strength of the joint and improve the joint stiffness. However, this kind of connection is quite new and needs more investigations to comprehend clearly the mechanical behaviors of this connection. In this paper, the tension tests with pultruded FRP double-lapped specimens connected by FRP bolts and adhesive were carried out to investigate mechanical characteristics as well as ultimate strength and failure modes of specimens.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn