Thông tin chung

  English

  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác

  Tài liệu tham khảo

  Hiệu chỉnh

 
Số người truy cập: 106,040,907

 Study on Mechanical Behavior of Self-tapping Screws Connection Using Washers in Single-Lapped Glass Fiber Reinforced Plastic Plates by Experiment and Finite Element Analysis
Tác giả hoặc Nhóm tác giả: N N Duong, P V Nhut, C Satake and Y Matsumoto
Nơi đăng: IOP Conference Series: Materials Science and Engineering (Scopus) ISSN:1757-899X; Số: 371 012025;Từ->đến trang: 1-8;Năm: 2018
Lĩnh vực: Kỹ thuật; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
In recent years, mechanical characteristics of Glass Fiber Reinforced Plastic (GFRP) connections using bolts/rivet have been researched in detail, and they are used in many GFRP structures. However, the connection lack bearing strength compared with material strength and they need the prepared holes. In this paper, we surveyed the self-tapping screws connection strength and effects of washers on connection strength of single-lapped GFRP plates using self-tapping screws under tensile-shear loading by experiment and finite element analysis (FEA). The strength of self-tapping screws connection in GFRP plates depends on the washer's diameters. When increasing washer's diameter, the bearing strength of connections increased. Hence, increasing washer's diameter at reasonable levels is an effective method to increase the load carrying capability for self-tapping screws connection in GFRP plates. Moreover, FEA was proposed to investigate the bearing strength of connections and there were good agreements between FEA and experimental results.
ABSTRACT
In recent years, mechanical characteristics of Glass Fiber Reinforced Plastic (GFRP) connections using bolts/rivet have been researched in detail, and they are used in many GFRP structures. However, the connection lack bearing strength compared with material strength and they need the prepared holes. In this paper, we surveyed the self-tapping screws connection strength and effects of washers on connection strength of single-lapped GFRP plates using self-tapping screws under tensile-shear loading by experiment and finite element analysis (FEA). The strength of self-tapping screws connection in GFRP plates depends on the washer's diameters. When increasing washer's diameter, the bearing strength of connections increased. Hence, increasing washer's diameter at reasonable levels is an effective method to increase the load carrying capability for self-tapping screws connection in GFRP plates. Moreover, FEA was proposed to investigate the bearing strength of connections and there were good agreements between FEA and experimental results.
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn