Thông tin chung
  English
  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác
  Tài liệu tham khảo
  Hiệu chỉnh
 
Số người truy cập: 107,149,599

 Practical Investigation on the Strengthening of the Built-Up Steel Main Girder of a Metro Station with Carbon-Fiber-Reinforced Polymer on the Inside Part of the Tensioned Flange
Tác giả hoặc Nhóm tác giả: Mohamed AMA Mahmoud, Phan Viet Nhut, Yukihiro Matsumoto
Nơi đăng: Buildings (SCIE); Số: 13 (7);Từ->đến trang: 1753;Năm: 2023
Lĩnh vực: Kỹ thuật; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
This study investigates the effectiveness of a carbon-fiber-reinforced polymer (CFRP) in enhancing the load-carrying capacity of a steel main girder in a metro station. The objective is to evaluate the applicability of CFRPs in sustaining increases in applied loads and assessing their effectiveness on curved surfaces. Finite element analysis (FEA) identified the most stressed areas of the girder under design loads. Based on the FEA results, a targeted strengthening procedure using CFRP sheets was proposed. Various arrangements of CFRP sheets were tested, including different orientations and thicknesses up to 60% of the girder’s flange thickness. To validate the FEA accuracy, two small-scale specimen beams were prepared and tested in the laboratory. One beam was strengthened with CFRP sheets on the tension part of the inner flange side, similar to the suggested strengthening method for the girder. The FEA results show that the CFRP increases stresses by an average of 8% to 10% for the steel main girder, with strengthening effects up to 19% at the center of the CFRP strengthening positions, differing from a regular straight flange shape. Significantly reducing stresses required a total CFRP layer thickness of at least 50% of the flange’s total thickness. Applying a CFRP on the inner face of the girder preserves its usability without the need for openings in finishes or the metal deck surface. The findings highlight CFRP’s potential to enhance load-carrying capacity on curved surfaces and sustain increased applied loads, offering a promising solution for strengthening infrastructure and similar applications.
ABSTRACT
This study investigates the effectiveness of a carbon-fiber-reinforced polymer (CFRP) in enhancing the load-carrying capacity of a steel main girder in a metro station. The objective is to evaluate the applicability of CFRPs in sustaining increases in applied loads and assessing their effectiveness on curved surfaces. Finite element analysis (FEA) identified the most stressed areas of the girder under design loads. Based on the FEA results, a targeted strengthening procedure using CFRP sheets was proposed. Various arrangements of CFRP sheets were tested, including different orientations and thicknesses up to 60% of the girder’s flange thickness. To validate the FEA accuracy, two small-scale specimen beams were prepared and tested in the laboratory. One beam was strengthened with CFRP sheets on the tension part of the inner flange side, similar to the suggested strengthening method for the girder. The FEA results show that the CFRP increases stresses by an average of 8% to 10% for the steel main girder, with strengthening effects up to 19% at the center of the CFRP strengthening positions, differing from a regular straight flange shape. Significantly reducing stresses required a total CFRP layer thickness of at least 50% of the flange’s total thickness. Applying a CFRP on the inner face of the girder preserves its usability without the need for openings in finishes or the metal deck surface. The findings highlight CFRP’s potential to enhance load-carrying capacity on curved surfaces and sustain increased applied loads, offering a promising solution for strengthening infrastructure and similar applications.
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn