Thông tin chung
  English
  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác
  Tài liệu tham khảo
  Hiệu chỉnh
 
Số người truy cập: 107,151,362

 Khả năng sử dụng vật liệu Bio-chip cho bể phản ứng sinh học theo mẻ
Tác giả hoặc Nhóm tác giả: Tran Ha Quan, Elena Gogina
Nơi đăng: VESTNIK MGSU (Monthly Journal on Construction and Architecture); Số: 15;Từ->đến trang: 592-604;Năm: 2020
Lĩnh vực: Kỹ thuật; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
ABSTRACT
Introduction. All over the world, the microbial biofilm has been regularly applied to modify urban and industrial wastewater treatment facilities that have aeration tanks. Unlike the activated sludge technology, the biofilm contains a substantial number of bacteria because microorganisms get attached to the surface of the material and grow there. The co-authors share their opinion about the BioChip, applied inside SBR, a sequencing batch reactor. This technology contemplates the use of freefloating activated sludge when all water treatment phases are concentrated inside one tank. Materials and methods. To assess the usability of the BioChip inside the SBR reactor, experiments were conducted in an attempt to remove two types of contaminants: organic substances inside the standard model of an SBR reactor, and biogenic elements, in particular, ammonium nitrogen, in the course of developing an anoxic zone in a modified model of the SBR reactor. The per-unit speed of substrate recycling, nitrification and denitrification is determined as a result of the analysis of the quality of wastewater and treated water. Results.The experiment conducted using the laboratory model of the SBR reactor has proven the water treatment efficiency within the range of 80–90 % in terms of organic substances and 75–85 % in terms of ammonium nitrogen. Inside the SBR reactor, that had a BioChip installed, the per-unit denitrification speed inside the reactor reached 0.3 to 0.4 N/kg of sludge/ day, for the process of nitrification, the value of speed varies from 0.18 to 0.2 kg N/kg of sludge/day. Per-unit speed values and the nitrogen balance equation inside the SBR reactor suggest the SBR operating mode at the capacity of 1.5–2.5 kg of the biological oxygen demand–TKN/kg of sludge/day. Conclusions. Low costs, smooth transportation and use in combination with the pre-set SBR reactor with a view to intensification of water treatment efficiency are the main strengths of the BioChip. The operation of the SBR reactor in combination with the BioChip and nitrification/denitrification phases requires highly skilled personnel.
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn