Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 112,298,152
Nghiên cứu độ ổn định tốc độ của trục chính máy tiện CNC.
Tác giả hoặc Nhóm tác giả:
Trần Ngọc Hải, Võ Như Thành
Nơi đăng:
Hội nghị khoa học và công nghệ toàn quốc về cơ khí lần thứ 4;
S
ố:
ISBN: 978-604-73-3691-3;
Từ->đến trang
: 180-187;
Năm:
2015
Lĩnh vực:
Khoa học công nghệ;
Loại:
Bài báo khoa học;
Thể loại:
Trong nước
TÓM TẮT
ABSTRACT
This paper presents the result of a study on lathes CNC spindle dynamics which are driving by DC motor in combination with V-belt, this power drive system has been used in many CNC lathes recently. In particular, this study focuses on establishing a dynamic model of the spindle, setting up mathematical equations and designing PID controller model. The transmission belt is assumed elastic, other parameters such as friction, the moment of inertia of the main axis and moment of inertia of rotor of DC motor are considered to be constant. The study simulates the response of spindle when adjusting some parameters of the spindle dynamic model, as well as switching speed; then a comparison of spindle response of the model when using P, PD, and PID controller using Matlab software is performed.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn