PERSONAL DETAILS

Full name:      NGUYEN KHANH QUANG

Date of birth: 07 MAY 1983                                Nationality:                         Vietnamese

Home town:  Hue City, Vietnam                        Marital status:                        Married

Gender:          Male                                            E-mail:                  nkquang@dut.udn.vn

Address:          335 Nguyen Huu Tho, Hai Chau, Danang 

Phone:                                    +84-914424858 (Mobile)

EDUCATION BACKGROUND

2011 – 2015: - PhD studies at Faculty of Engineering and Information Technology, University of Technology Sydney, NSW, Australia

2008 – 2010: - Master studies at Faculty of Electrical Engineering, Southern Taiwan University of Technology, Tainan, Taiwan

2001 – 2006: - Undergraduate studies at Faculty of Electrical Engineering, Danang University of Technology, Danang, Vietnam

WORKING EXPERIENCES

His working experiences includes:

07/2020 – Now:

- Lecturer, Division of Control Engineering and Automation, Faculty of Electrical Engineering, University of Science and  Technology-The University of Danang

09/2006 – 07/2020:

-  Deputy Head of Department of Training and Student Affairs, Hue Industrial College, Vietnam

- Head of Department of Electronics and Automation, Faculty of Electrical and Electronic Engineering, Hue Industrial College, Vietnam

- Visiting Lecturer for teaching under-graduate and post-graduate students in Danang University of Technology, Qui Nhon University, Hue University

-  His research and teaching interests include automation, robotics, motion control, field-programmable-gate-array-based control, and estimation for motor drives applications

 - Research member, Research and Technology Transfer, Hue Industrial  College, Vietnam

- Instructor for students at Innovative Challenge and Tech Expo in Thua Thien Hue Province, 2016 

- Lead intstructor of USAID Comet (USAID Connecting the Mekong through Education and Training) in 2016 

- PD Coaching expert of USAID Comet (USAID Connecting the Mekong through Education and Training) in 2018 

- Work-Based Learning expert of USAID Comet (USAID Connecting the Mekong through Education and Training) in 2018 

- Work-Based Learning Coordinator of Hue Industrial College

07/2011 – 11/2015:

- Teaching Assistant in Advance control, Electromachanical Automation, University of Technology Sydney, NSW, Australia  (4 years)

9/2008 – 07/2010:  

- Teaching Assistant in Digital System Design, Southern Taiwan University of Technology, Tainan, Taiwan (2 years)

- Research member, Control IC Design Lab, Southern Taiwan University of Technology, Tainan, Taiwan

ADDITIONAL PROFESSIONAL DEVELOPMENT

His additional PD includes:

2015 - Professional Development, participating in “Policy planning for energy efficiency & conservation program”, Japan International Cooperation Agency (JICA), Japan 

2016 - completed the instructor training program for “USAID Connecting Mekong through Education and Training”, Bangkok, Thailand

2017 - completed the instructor training program for Youthspark Career Readiness Trainer supported by Microsoft, Danang, Vietnam

-          completed the coordinator training program for “Work-Based Learning”, Bangkok, Thailand

-          awarded the diploma in vocational training skills by City&Guilds, England

-          completed the training course for “Innovation Management and Innovation Systems-Swedish Model”, HoChiMinh, Vietnam

2018 - completed the training of trainers program for “Innovation and Entrepreneurship”, Hue, Vietnam

PUBLICATIONS

1. Huynh Nil Giang, Nguyen Kim Anh, Nguyen Khanh Quang, Linh Nguyen, “An Inspection Robot for Detecting and Tracking Welding Seam”, IEEE 2021 Innovations in Intelligent Systems and Applications Conference (ASYU), 2021, pp. 1-6, Turkey

2. Le Phuong Truong, Nguyen Khanh Quang, Nguyen Van Sy, “Design and Implementation of a Fault-monitoring device for photovoltaic systems based on IoT platform”, Vol. 130 No. 2A, 2021

3. Ngo Van Quang Binh, Nguyen Khanh Quang, Nguyen Tu Ha, Hoang Dinh Long, Dao Quoc Chinh, “Model predictive direct power control of three-level T-type inverter-fed doubly-fed induction generator for wind energy system”, Vol. 130 No. 1D, 2021

4. Nguyen Khanh Quang, Nguyen Ho Quang, “FPGA Technology and Sequential Finite State Machine Method”, Hue University Journal of Science: Natural Science, Vol. 127, Issue-1D, pp. 55-62, Dec. 2018

5. Nguyen Khanh Quang, Nguyen Trung Hieu, "FPGA-Based Integral Sliding Mode Control for PMSM Drives," IEEE Transactions on Industrial Informatics, under review 2018 (JCR 2015, IF: 6.76)

6. Nguyen Khanh Quang, Doan Duc Tung, “Development of Sensorless Control Drive for Permanent Magnet Synchronous Motor Using a System-on-Programmable-Chip”, International Journal of Electrical, Electronics And Data Communication, Vol. 4, Issue-8, pp. 59-64, Aug. 2016 (IF: 1.6)

7. Nguyen Khanh Quang, Nguyen Trung Hieu, and Ha, Q.P., "FPGA-Based Sensorless PMSM Speed Control Using Reduced-Order Extended Kalman Filters," IEEE Transactions on Industrial Electronics, vol. 61, no. 12, pp. 6574-6582, Dec. 2014. (JCR 2015, IF: 7.16)

8. Q. P. Ha, Ying-Hao Yu and Nguyen Khanh Quang, "FPGA-based cooperative control of indoor multiple robots," International Journal of Advanced Mechatronic Systems, Vol. 4, Nos. 5/6, pp. 248-259, 2012. (IF: 1.5)

9. Nguyen Khanh Quang, N. T. Hieu and Q. P. Ha, "FPGA Sensorless PMSM Drive with Adaptive Fading Extended Kalman Filtering," Proc. of IEEE Int. Conf. on Control, Automation, Robotics and Visions, ICARV2014, Singapore, pp. 295-300, 2014.

10. Nguyen Khanh Quang, Doan Quang Vinh, Nguyen D. That and Q. P. Ha, "Observer-based Integral Sliding Mode Control for Sensorless PMSM Drives using FPGA, "Proc. of IEEE Int. Conf. on Control, Automation and information Sciences, ICCAIS2013, Vietnam, pp. 218-223, 2013.

11. Nguyen Khanh Quang, Doan Quang Vinh, "Sensorless FPGA-Based PMSM Drives using Improved SMO," Proc. of Vietnam conference on Control and Automation, VCCA2013, Vietnam, pp. 164-170, 2013.

12. Nguyen D. That, Nguyen Khanh Quang, Pham Thanh and Q. P. Ha, "Robust Exponential Stabilization of the Pendubot in the Presence of Bounded External Disturbances Using Sliding Mode Control," Proc. of IEEE Int. Conf. on Control, Automation and information Sciences, ICCAIS2013, Vietnam, pp. 206-211, 2013.

13. Tri Tran and Nguyen Khanh Quang, "Distributed Model Predictive Control with Receding-Horizon Stability Constraints," Proc. of IEEE Int. Conf. on Control, Automation and information Sciences, ICCAIS2013, Vietnam, pp. 137-141, 2013.

14. Nguyen Khanh Quang, Nguyen D. That, Nguyen Hong Quang and Q. P. Ha, "FPGA-based Fuzzy Sliding Mode Control for Sensorless PMSM Drive," Proc. Of IEEE Int. Conf. on Automation Science and Engineering, CASE2012, Korea, pp. 172-177, 2012.

15. Nguyen Khanh Quang, N. T. Hieu, G. P. Hunter, and Q. P. Ha, "FPGA-based Sensorless PMSM Drive Using Parallel Reduced-Order Extended Kalman Filter," Proc. Of IEEE Conf. on Control, Automation and information Sciences, ICCAIS2012, Vietnam, pp.164-169, 2012.

16. Nguyen Khanh Quang, Tri Tran, "Dissipativity Criterion for Linear Systems with a Coupling Delay and Asymptotically Positive Realness Constraint," Proc. of IEEE Int. Conf. on Control, Automation and information Sciences, ICCAIS2012, Vietnam, pp. 60-65, 2012.

17. Nguyen D. That, Nguyen Khanh Quang, Raja M. T. Raja Ismail, Phan T. Nam and Q. P. Ha, "Improved reachable set bounding for linear systems with discrete and distributed delays," Proc. of IEEE Int. Conf. on Control, Automation and information Sciences, ICCAIS2012, Vietnam, pp. 137-141, 2012.

18. Nguyen Khanh Quang, Y.-S. Kung, and Q. P. Ha, "FPGA-Based Control Architecture Integration for Multiple-Axis Tracking Motion Systems," Proc. of IEEE/SICE Int. Symposium on System Integration, SII2011, Japan, pp. 591-596, 2011.

19. Y.S. Kung, Nguyen Khanh Quang and Le Thi Van Anh, "FPGA-based neural fuzzy controller design for PMLSM drive," Proc. of IEEE Int. Conf. on Power Electronics and Drive Systems, PEDS2009, Taiwan, pp. 222-227, 2009.

FOREIGN LANGUAGES

English, Chinese