Thông tin chung


  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác

  Tài liệu tham khảo

  Hiệu chỉnh

Số người truy cập: 74,893,365

 Nghiên cứu kết hợp ToF-SIMS và XPS để giải thích vai trò của nước đối với hiệu suất của quá trình plasma sau sử dụng xúc tác LaMnO3 cho phản ứng oxy hóa hoàn toàn trichlo-etylen
Tác giả hoặc Nhóm tác giả: N. Nuns, A. Beaurain, M.T. Nguyen Dinh, A. Vandenbroucke, N. De Geyter, R. Morent, C. Leys, J.-M. Giraudon, J.-F. Lamonier
Nơi đăng: Applied Surface Science
cvs weekly sale cvs print prescription savings cards
; Số: 320;Từ->đến trang: 154–160;Năm: 2014
Lĩnh vực: Khoa học công nghệ; Loại: Bài báo khoa học; Thể loại: Quốc tế
LaMnO3+δ which is an environment-friendly and inexpensive material has been previously used as catalyst in Post-Plasma Catalysis (PPC) in the total oxidation of trichloroethylene (TCE) which is a solvent widely used in dry cleaning and degreasing processes. It has been shown that the process efficiency increases in moist air (RH = 18%).The issue we want to address herein is the effect of water on the location of chlorine at the surface of the catalyst as chlorine is able to alter the catalyst structure, activity and stability. Therefore, a combined Time of Flight-Secondary Ion Mass Spectrometry (ToF-SIMS) and X-ray Photoelectron Spectroscopy (XPS) study has been carried out on the fresh LaMnO3+δ catalyst (LM) and used catalysts after performing PPC with TCE diluted in dry synthetic air (LM0) or with industrial air containing water (LM18; 18 stands for the Relative Humidity) and CO2 (about 560 ppmv) at a temperature of 150 °C. XPS and ToF-SIMS results both show the presence of chlorine on the tested catalysts whose amount increases by exposure of the catalyst to the reactive mixture in dry synthetic air. XPS results reveal that chlorine is present as both chloride ion and covalent chlorine on LM0 while organic chlorinated residues are absent on LM18 catalyst. ToF-SIMS study indicates that lanthanum excess as oxide(hydroxide) partially covering the perovskite mainly transforms into LaOCl and to a minor extent into LaCl3. Extent of Mn chlorination seems to be favored over LM0 having a higher MnClx±/MnOCl± ionic ratio compared to LM18. Furthermore ToF-SIMS clearly identifies C1 chlorinated organic ions, mainly CH2Cl+ and CHCl2−, on LM0 which may contribute to the XPS Cl organic component. From the combined ToF-SIMS and XPS results it is found that water delays the surface degradation extent of the perovskite into related (oxy)(hydroxy)chlorinated inorganic phases by less molecular chlorine and related chlorine species on the catalyst surface. A reaction scheme of Cl removal over LaMnO3+δ emphasing the role of water is given taking into account the detection of ToF-SIMS ions representative of the successive Mn intermediate states. As a consequence water allows tuning the degradation pathways of the main intermediate of the reaction, dichloroacetyl chloride (DCAC), which decomposes to give phosgene, HCCl3 and CCl4 by a successive Cl incorporation over (oxy)(hydroxy)chorinated perovskite or/and Mn species while COx species are likely formed over the perovskite.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: