Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 109,885,421
Determination of optimal sample thickness and positions of transducer for the effective Higher Order Mode Cluster-guided wave generation
Tác giả hoặc Nhóm tác giả:
Che-Hua Yang, Van Nguyen Le, and M Saravana Kumar
Nơi đăng:
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture;
S
ố:
Online;
Từ->đến trang
: 1-13;
Năm:
2023
Lĩnh vực:
Kỹ thuật;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
ABSTRACT
Higher Order Mode Cluster (HOMC) guided waves (GW) have recently been proposed for ultrasonic testing of plates and pipes. The incident wave through the plastic wedge generates the HOMC-GW. A propagated distance, namely the HOMC formation field, is necessary to create the wave signal. Unfortunately, the HOMC wave is unstable in the formation region, which needs a longer distance for stability. This research examines the effect of sample thickness on theHOMC generation process. ABAQUS CAE simulated the HOMC generation in various samples with different thicknesses, such as 6, 7, 10, 15, and 20 mm. The results show that HOMC stability was achieved at a shorter distance in the smaller sample (6 mm) compared to the larger sample (20 mm). Moreover, the ABAQUS-Explicit 2D-FEA model was used for notch detection in a mild steel sample based on the HOMC status. The result shows that the transducer’s strength decreases along the formation regions, and the reflected amplitude becomes more robust when it reaches thestable region. When it travels further, the amplitude gets weaker due to the reduction in its energy. The experimental study was conducted similarly to the 2D-FEA model to compare the simulation and experimental results. The empirical findings show good agreement with the simulation results throughout notch detection. The precise distance required for the HOMC wave to become stable was determined via this work, optimizing the selection and employment of single modes.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn