Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 107,318,286
Thickness independent microwave absorption performance of La-doped BaFe
12
O
19
and polyaniline composites
Tác giả hoặc Nhóm tác giả:
N. Tran, M.Y. Lee, W.H. Jeong, T.L. Phan,
N.Q. Tuan
, B.W. Lee
Nơi đăng:
Journal of Magnetism and Magnetic Materials;
S
ố:
538;
Từ->đến trang
: 168299;
Năm:
2021
Lĩnh vực:
Khoa học;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
Absorber thickness is a crucial factor in microwave absorption performance. Therefore, the researches about the influence of thickness on microwave absorption performance have been intensively investigated. In this work, we prepared La-doped BaFe12O19 with a concentration of 0, 0.1, 0.3, and 0.5 by using co-precipitation then mixed with polyaniline by 10% wt. Morphological, structural, magnetic, and electromagnetic properties were evaluated using SEM, XRD, VSM, and VNA analysis. The doping modified all the properties of the samples and consequently enhanced their microwave absorption properties. The La-doping and polyaniline compositing possessed significance for maintaining reflection loss values for all composites when the absorber thicknesses varied in the range of 1.75–3.50 mm. The best microwave absorption performance could be found in the Ba0.9La0.1Fe12O19/polyaniline (named La-P1) composite, with more than 90% of the incident wave being absorbed for all measured thicknesses. Effective bandwidths of the La-P1 increased when thickness decreased and reached a maximum of 2.52 GHz for the thickness of 1.75 and 2.00 mm.
ABSTRACT
Absorber thickness is a crucial factor in microwave absorption performance. Therefore, the researches about the influence of thickness on microwave absorption performance have been intensively investigated. In this work, we prepared La-doped BaFe12O19 with a concentration of 0, 0.1, 0.3, and 0.5 by using co-precipitation then mixed with polyaniline by 10% wt. Morphological, structural, magnetic, and electromagnetic properties were evaluated using SEM, XRD, VSM, and VNA analysis. The doping modified all the properties of the samples and consequently enhanced their microwave absorption properties. The La-doping and polyaniline compositing possessed significance for maintaining reflection loss values for all composites when the absorber thicknesses varied in the range of 1.75–3.50 mm. The best microwave absorption performance could be found in the Ba0.9La0.1Fe12O19/polyaniline (named La-P1) composite, with more than 90% of the incident wave being absorbed for all measured thicknesses. Effective bandwidths of the La-P1 increased when thickness decreased and reached a maximum of 2.52 GHz for the thickness of 1.75 and 2.00 mm.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn