Thông tin chung

  English

  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác

  Tài liệu tham khảo

  Hiệu chỉnh

 
Số người truy cập: 107,365,473

 New performing hydroxyapatite-based catalysts in dry-reforming of methane
Tác giả hoặc Nhóm tác giả: Thanh Son Phan, Doan Pham Minh
Nơi đăng: International Journal of Hydrogen Energy; Số: (In Press);Từ->đến trang: (In Press);Năm: 2023
Lĩnh vực: Khoa học công nghệ; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
Dry reforming of methane (DRM) is a promising process for the production of synthetic gas from carbon dioxide and methane. However, the design of a performing catalyst for this reaction is still challenging since catalyst deactivation usually takes place, principally by thermal sintering at high temperatures (700–950 °C) and by carbon deposition. In this work, calcium hydroxyapatite (HAP) and HAP-doped magnesium (Mg_HAP) supported nickel catalysts were synthesized by wet precipitation method, characterized by various physico-chemical and thermal techniques, and evaluated in DRM reaction. Outstanding catalytic performance in DRM could be obtained with Ni/ HAP and Ni/Mg_HAP catalysts, thanks to a tunable acidity-basicity of these supports, a strong metal-support interaction, and a good thermal stability of nickel nanoparticles. H2 and CO were the main products, with stable selectivity up to 85 ∓ 3%, while H2O and solid carbon were byproducts with 5–10% of selectivity.
ABSTRACT
Dry reforming of methane (DRM) is a promising process for the production of synthetic gas from carbon dioxide and methane. However, the design of a performing catalyst for this reaction is still challenging since catalyst deactivation usually takes place, principally by thermal sintering at high temperatures (700–950 °C) and by carbon deposition. In this work, calcium hydroxyapatite (HAP) and HAP-doped magnesium (Mg_HAP) supported nickel catalysts were synthesized by wet precipitation method, characterized by various physico-chemical and thermal techniques, and evaluated in DRM reaction. Outstanding catalytic performance in DRM could be obtained with Ni/ HAP and Ni/Mg_HAP catalysts, thanks to a tunable acidity-basicity of these supports, a strong metal-support interaction, and a good thermal stability of nickel nanoparticles. H2 and CO were the main products, with stable selectivity up to 85 ∓ 3%, while H2O and solid carbon were byproducts with 5–10% of selectivity.
[ 1-s2.0-s0360319923021031-main.pdf ]
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn