Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 106,050,888
An Integration of Buck Converter Topology for High Efficiency Used in LED Driver Circuit
abortion stories gone wrong
information about abortions
teenage abortion facts
Tác giả hoặc Nhóm tác giả:
Trinh Trung Hieu; Nguyen Huu Hieu
Nơi đăng:
2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC), Taipei, Taiwan, November 2015;
S
ố:
978-1-4799-7655-3;
Từ->đến trang
: 1-6;
Năm:
2015
Lĩnh vực:
Kỹ thuật;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
This paper presents an interleaved integrated buck converter for a high efficiency LED driver circuit. This integrated circuit can drive a high-power LED (1W - 3W). Assembled in matrices, it is able to drive multiple high-power LEDs. The operation principle, the power loss levels of buck converter, the design approach, technology of chip and the choice of passive components are analyzed and discused in detail. The prototype of an integrated buck converter is designed and tested for the input voltage 3.3V, current load from 0.3A to 1A at a switching frequency of 500kHz. Experimental results of four buck converters connected in parallel to drive eight 1W Lumileds show demonstrative and satisfactory results with the highest efficiency of 97.2% at the nominal load
ABSTRACT
This paper presents an interleaved integrated buck converter for a high efficiency LED driver circuit. This integrated circuit can drive a high-power LED (1W - 3W). Assembled in matrices, it is able to drive multiple high-power LEDs. The operation principle, the power loss levels of buck converter, the design approach, technology of chip and the choice of passive components are analyzed and discused in detail. The prototype of an integrated buck converter is designed and tested for the input voltage 3.3V, current load from 0.3A to 1A at a switching frequency of 500kHz. Experimental results of four buck converters connected in parallel to drive eight 1W Lumileds show demonstrative and satisfactory results with the highest efficiency of 97.2% at the nominal load
walgreens prints coupons
prescription coupon card
free printable coupons
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn