Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 106,075,750
Proposition, validation d’un modèle du seuil d’interface à partir des paramètres de formulation des bétons et calcul de la pression de pompage
Tác giả hoặc Nhóm tác giả:
Chanh-Trung Mai
Nơi đăng:
PhD Thesis in Civil Engineering - France;
S
ố:
19-03-2015;
Từ->đến trang
: 1-158;
Năm:
2015
Lĩnh vực:
Kỹ thuật;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
ABSTRACT
With many advantages over traditional techniques, the pumping technique is widely used nowadays in the civil engineering field. To use this technique, the concrete must be considered "pumpable". Previous studies have all shown that the pumpability of concrete depends on the friction at the interface between the concrete and the pipe wall (the viscous constant and the interface yield stress). Improving pumpability (while maintaining stability, homogeneity and mechanical properties of concrete) will reduce the implementation time of concrete and to advance work on site. In this context, the main objective of this work is the modeling of the interface yield stress from the formulation parameters and calculating the concrete pumping pressure. To facilitate the study, an experimental database was built to demonstrate the effect of the composition parameters of ordinary concrete and concrete with mineral additions on the interface parameters, so the pumpability. This database was then used to propose and validate an interface yield stress calculation model based on composition parameters and slump. The precision of this model is of around ± 13%. Ensuite, le modèle proposé a été utilisé pour estimer la pression de pompage. The comparison between the estimated pumping pressures and those measured experimentally on the site by other researchers has shown that the proposed method provides the pressure values with a precision of the order of 15%. The results of this study provide important scientific database for the pumping technology users and highlight the role of each formulation component on the interface parameters. They can also be used for other future research work.Keywords: concrete pumping, pumping pressure, tribometer, friction, viscous constant, interface yield stress, rheology, composition parameters, modeling.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn