Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 107,432,856
Effect of footing roughness on ultimate bearing capacity of rigid strip footing on sandy soil slope
Tác giả hoặc Nhóm tác giả:
Pham N. Quang*
, and Pham N. Vinh
Nơi đăng:
The University of Danang - Journal of Science and Technology, ISSN: 1859-1531.;
S
ố:
Vol. 21, No. 12.1, 2023;
Từ->đến trang
: 22-27. https://doi.org/10.31130/ud-jst.2023.472E;
Năm:
2023
Lĩnh vực:
Kỹ thuật;
Loại:
Bài báo khoa học;
Thể loại:
Trong nước
TÓM TẮT
This extensive study explores the determination of the ultimate bearing capacity of a rigid strip footing on a sandy slope through the utilization of the Rigid Plastic Finite Element Method (RPFEM). To accurately represent a wide range of frictional conditions at the footing roughness, a new interface element was introduced, capable of accommodating both perfectly rough and perfectly smooth conditions. A new constitutive equation is introduced to model these interface elements, which had a significant influence on the failure mode of the strip footing. Moreover, the study focuses on assessing critical parameters, including the internal friction angle of the sandy ground, as well as slope geometry parameters (slope angle
b
, edge distance
L
, and slope height
H
). The RPFEM results illustrate that increasing the edge distance positively influences the bearing capacity, while a higher slope angle exerts a negative effect. Notably, variations in slope height produce consistent outcomes, regardless of the frictional conditions.
ABSTRACT
This extensive study explores the determination of the ultimate bearing capacity of a rigid strip footing on a sandy slope through the utilization of the Rigid Plastic Finite Element Method (RPFEM). To accurately represent a wide range of frictional conditions at the footing roughness, a new interface element was introduced, capable of accommodating both perfectly rough and perfectly smooth conditions. A new constitutive equation is introduced to model these interface elements, which had a significant influence on the failure mode of the strip footing. Moreover, the study focuses on assessing critical parameters, including the internal friction angle of the sandy ground, as well as slope geometry parameters (slope angle
b
, edge distance
L
, and slope height
H
). The RPFEM results illustrate that increasing the edge distance positively influences the bearing capacity, while a higher slope angle exerts a negative effect. Notably, variations in slope height produce consistent outcomes, regardless of the frictional conditions.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn