Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 106,999,184
Experimental comparison between displacements and surface defects measurements applied to planar joint
Tác giả hoặc Nhóm tác giả:
Lê Hoài-Nam
, Ledoux Yann, Darnis Philippe, Ballu Alex
Nơi đăng:
Proceedings of the IMProVe, International conference on Innovative Methods in Product Design, Venise (Italy);
S
ố:
1;
Từ->đến trang
: 1;
Năm:
2011
Lĩnh vực:
Khoa học công nghệ;
Loại:
Báo cáo;
Thể loại:
Quốc tế
TÓM TẮT
ABSTRACT
In tolerancing, numerous works deal with the theory of tolerance analysis and synthesis of mechanisms, others deal with verification of isolated parts, but no study has focused specifically on the metrology of mechanisms. Nowaday, the metrology of mechanisms begins to be a key parameter for validating the theoretical model of joint. At first, a measuring system is presented; it allows to determine experimentally joint behaviours. This device is based on a set of displacement sensors, located outside the joint, to capture every spatial displacement. From the measures, the three rotations and three translations of displacement are computed. The originality of the system is to allow the visualization of the gap hull of the joint. Moreover, the distribution of the local form defects of the surfaces in contact inside the joint may be determined. In parallel, the surfaces in contact are measured with an area surface texture measuring instrument. From these measurements, it is proposed to compute theoretically the gap hull. Finally, a comparison of both hulls is presented.Keywords : Gap hull, difference surface, joint behaviour, form defect, tolerancing
abortion stories gone wrong
information about abortions
teenage abortion facts
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn