Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 109,897,598
A Test Rig for Evaluating Tilting–Pad Journal Bearing Characteristics
Tác giả hoặc Nhóm tác giả:
Phuoc Vinh Dang
, Steven Chatterton, Paolo Pennacchi, Andrea Vania
Nơi đăng:
9th International Conference on Rotor Dynamics IFToMM ICORD 2014, Milan, Italy
unfaithful spouse
infidelity
i dreamed my husband cheated on me
;
S
ố:
21. ISBN 978-3-319-06589-2;
Từ->đến trang
: 921-930; doi: 10.1007/978-3-319-06590-8_75;
Năm:
2014
Lĩnh vực:
Kỹ thuật;
Loại:
Báo cáo;
Thể loại:
Quốc tế
TÓM TẮT
ABSTRACT
Tilting pad journal bearings (TPJBs), owing to their inherent dynamic stability characteristics, have been widely used to support the rotors of high rotating machinery such as steam and gas turbines. TPJBs offer better stability than fixed geometry bearings due to their lower cross-coupled stiffness coefficients. Because of the merit, a large of theoretical and experimental studies have been executed to reveal important characteristics of the TPJBs such as fluid–film thickness, pad–pivot friction, load capacity, temperature, stiffness and damping coefficients and so on. However, the theoretical evaluation of these coefficients for TPJBs is difficult because of their complex geometry, boundary and thermal conditions and turbulent flow. Therefore it is very essential to design and build a suitable test rig for performing experiments. This paper describes a test rig with unusual configuration compared to test rigs which are available in literature for the experimental characterization of TPJBs. The bearings could be installed in the load–on–pad (LOP) or load–between–pad (LBP) configurations. In particular, Sommerfeld number, steady–state and transient temperatures, pad pressure, dynamic stiffness and damping coefficients in different operation conditions could be estimated.
abortion stories gone wrong
how to abort at home
teenage abortion facts
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn