Thông tin chung
  English
  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác
  Tài liệu tham khảo
  Hiệu chỉnh
 
Số người truy cập: 106,834,817

 CO2 Methanation Under Dynamic Operational Mode Using Nickel Nanoparticles Decorated Carbon Felt (Ni/OCF) Combined with Inductive Heating
Tác giả hoặc Nhóm tác giả: Wei Wang, Cuong Duong-Viet, Zhenxin Xu, Housseinou Ba, Giulia Tuci, Giuliano Giambastiani, Yuefeng Liu, Tri Truong-Huu, Jean-Mario Nhut, Cuong Pham-Huu
Nơi đăng: Catalysis Today; Số: 357;Từ->đến trang: 214-220;Năm: 2020
Lĩnh vực: Khoa học công nghệ; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
Carbon dioxide (CO2) hydrogenation to methane (CH4) (Sabatier reaction) is a fundamental process that meets with several key challenges of our modern society. Besides representing a convenient way to the metal-mediated conversion of a natural and abundant “waste” into a fuel of added value, its combination with H2 from renewable resources (REs) represents a challenging technology for the REs storage. In addition, its practical exploitation can give a concrete answer to many critical societal and environmental issues largely related to the steadily increase of CO2 concentration in the Earth’s atmosphere caused by the main anthropic activities. Although many fundamental achievements have also been reached since its discovery at the beginning of the twentieth century, alternative and conceptually new protocols for the process can provide valuable solutions to the optimization of the catalyst performance, process energetics and catalyst life-time on stream. This contribution describes the synthesis of an efficient and robust catalyst for the CO2 methanation, based on Nickel nanoparticles (Ni-NPs) grown on electrically conductive and macroscopically shaped oxidized carbon-felt disks (OCF), heated at the target reaction temperature by electromagnetic induction. At odds with the more classical external heat sources (based on contact heat conduction), induction heating allows the electromagnetic energy to be directly absorbed by the susceptor (OCF) who converts it into heat to be transferred to the catalyst active sites (Ni NPs). Inductive heating (IH) of Ni/OCF gives CO2 conversion (XCO2) up to 74% and CH4 selectivity (SCH4) close to 97% already at 320 °C, showing an excellent control of the catalyst stability under forced dynamic operational conditions.
ABSTRACT
Carbon dioxide (CO2) hydrogenation to methane (CH4) (Sabatier reaction) is a fundamental process that meets with several key challenges of our modern society. Besides representing a convenient way to the metal-mediated conversion of a natural and abundant “waste” into a fuel of added value, its combination with H2 from renewable resources (REs) represents a challenging technology for the REs storage. In addition, its practical exploitation can give a concrete answer to many critical societal and environmental issues largely related to the steadily increase of CO2 concentration in the Earth’s atmosphere caused by the main anthropic activities. Although many fundamental achievements have also been reached since its discovery at the beginning of the twentieth century, alternative and conceptually new protocols for the process can provide valuable solutions to the optimization of the catalyst performance, process energetics and catalyst life-time on stream. This contribution describes the synthesis of an efficient and robust catalyst for the CO2 methanation, based on Nickel nanoparticles (Ni-NPs) grown on electrically conductive and macroscopically shaped oxidized carbon-felt disks (OCF), heated at the target reaction temperature by electromagnetic induction. At odds with the more classical external heat sources (based on contact heat conduction), induction heating allows the electromagnetic energy to be directly absorbed by the susceptor (OCF) who converts it into heat to be transferred to the catalyst active sites (Ni NPs). Inductive heating (IH) of Ni/OCF gives CO2 conversion (XCO2) up to 74% and CH4 selectivity (SCH4) close to 97% already at 320 °C, showing an excellent control of the catalyst stability under forced dynamic operational conditions.
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn