Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 106,949,450
Investigation of Red Mud surface properties for catalytic reaction studies
Tác giả hoặc Nhóm tác giả:
Tatjána JUZSAKOVA, Ákos RÉDEY, Tamás FRATER, Cuong Le Phuoc, József Németh, Viktor Sebestyen
Nơi đăng:
THE INTERNATIONAL CONFERENCE AIR AND WATER - COMPONENTS OF THE ENVIRONMENT;
S
ố:
8;
Từ->đến trang
: 25 – 27 March 2016;
Năm:
2016
Lĩnh vực:
Khoa học công nghệ;
Loại:
Báo cáo;
Thể loại:
Quốc tế
TÓM TẮT
The disposal of the red mud exhibits problem not only in Hungary, however, the majority of the European Union and other countries is facing with the same problem, for example Romania also has large amount the red mud disposal facilities. Because of the red mud high metal content can be considered as secondary raw material for it possible utilization. In principle, there are two possibilities for red mud utilization. The first one is its use as a uniform material of special physical and chemical properties. The second option includes processing of red mud, which means separation of different components / metals and transformation each of them into valuable products. Concerning the first option above, among the uses standing out are those reported on the utilization of red mud in building materials, such as cement, bricks, roofing tiles and other ceramic products. Also red mud can be considered as potential catalyst for different type of reactions such as hydro-dealkylation of aromatic compounds and cracking. Iron and metal components (Al, Ti, V, etc.) of red mud determine its catalytic activity.The characteristic features and surface properties of the untreated and thermally treated red mud is important from the possible future utilization of the red mud in different chemical reactions. The structural, physical and chemical, morphological properties were investigated by XRD, BET, AAS, ammonia pulse chemisorption methods. The obtained results support the notion that the red mud can be used for catalytic processes carried out at temperature not above than 500°C (optimum 400-500°C)
ABSTRACT
[
2019\2019m04d030_15_59_30(5,8)Program_CAA_2016_final.pdf
]
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn