Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 109,878,580
Case Studies for Clean Technology Development in the Chemical Industry Using Zeolite Based Catalysts
Tác giả hoặc Nhóm tác giả:
Juzsakova, T.; Al-Jammal, N.; Cretescu, I.; Sebestyén, V.;
Le Phuoc, C.;
Domokos, E.; Rédey, Á.; Stan, C.D
Nơi đăng:
Minerals (MDPI, SCIE, IF 1.835);
S
ố:
8, 462;
Từ->đến trang
: 1-14;
Năm:
2018
Lĩnh vực:
Môi trường;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
This paper deals with the practical implementation of cleaner technologies in the chemical industry, using two case studies as an illustration. The first case study deals with the removal of NOx and N2O gases over an iron-doped ZSM-5 catalyst developed for tail gas treatment in nitric acid manufacturing. The aim for this case study was to investigate the efficiency of the zeolitic catalyst in the DeNOx process and to compare its catalytic activity with the conventional vanadia-titania. By the experiments carried out, it can be concluded that the new technological developments could significantly contribute to a decrease in environmental pollution. The second case study focuses on zeolite-based catalysts prepared from zeolitic tuff by the impregnation method, for biodiesel production from waste sunflower vegetable oil. The effects of operating and processing variables such as reaction temperature and time were investigated. The results showed that the highest biodiesel yield was 96.7% at an 11.5 MeOH/oil molar ratio, in the presence of 6.4 wt % catalyst at a 50 ◦C reaction temperature and reaction time of 2 h. The properties of the biodiesel that was produced, such as the viscosity, meet the required specifications of standard JUS EN14214. The common feature of the two different case studies is that both technologies use zeolite catalysts, namely naturally-occurring zeolitic tuff and synthetic ZSM type zeolite catalyst. The examples shown emphasize the importance of the zeolites in clean chemical technologies, which contribute to the protection of the environment
ABSTRACT
[
2018\2018m010d018_11_59_52minerals-08-00462.pdf
]
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn