Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 107,407,587
V2O5 Nanoparticles for Dyes Removal from Water
Tác giả hoặc Nhóm tác giả:
Thamer A. A., Tatjana J., Rashed T. R., Ali D. S., Mohammad A.,
Phuoc-Cuong Le
, Igor C.
Nơi đăng:
CHEMISTRY JOURNAL OF MOLDOVA (ESCI);
S
ố:
2021, 16(2),;
Từ->đến trang
: 102-111;
Năm:
2021
Lĩnh vực:
Môi trường;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
Rapid population growth, urbanization and industrialization pose significant threats to the aquatic ecosystem. The discharge of untreated dyes contaminated wastewater causes harmful chemical and biological changes in water bodies as well as human disease. The most common dye used at industrial scale is methylene blue (MB). Recently, numerous metal oxide nanoparticles adsorbents have been applied for the purpose of treatment of water from dyes. This paper deals with V2O5 nanoparticles adsorbents, obtained by thermal pre-treatment carried out by increasing the temperatures between 90 and 750°C. The surface chemistry of the newly prepared nanoparticles was investigated by X-ray diffraction and scanning electron microscopy, Fourier Transform infrared spectroscopy and thermogravimetric techniques. Furthermore, the prepared nanoparticles were tested for MB removal from modelled water solution. The obtained results indicated that high MB removal efficiency (93%) and adsorption capacity (27 mg/g) after 40 min of adsorption were obtained for samples of V2O5 annealed at 500oC in comparison with V2O5 treated at 90, 250 and 750oC, respectively. The applicability and suitability of the two kinetic models were tested and the removal mechanism was proposed.
ABSTRACT
Rapid population growth, urbanization and industrialization pose significant threats to the aquatic ecosystem. The discharge of untreated dyes contaminated wastewater causes harmful chemical and biological changes in water bodies as well as human disease. The most common dye used at industrial scale is methylene blue (MB). Recently, numerous metal oxide nanoparticles adsorbents have been applied for the purpose of treatment of water from dyes. This paper deals with V2O5 nanoparticles adsorbents, obtained by thermal pre-treatment carried out by increasing the temperatures between 90 and 750°C. The surface chemistry of the newly prepared nanoparticles was investigated by X-ray diffraction and scanning electron microscopy, Fourier Transform infrared spectroscopy and thermogravimetric techniques. Furthermore, the prepared nanoparticles were tested for MB removal from modelled water solution. The obtained results indicated that high MB removal efficiency (93%) and adsorption capacity (27 mg/g) after 40 min of adsorption were obtained for samples of V2O5 annealed at 500oC in comparison with V2O5 treated at 90, 250 and 750oC, respectively. The applicability and suitability of the two kinetic models were tested and the removal mechanism was proposed.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn