Thông tin chung
  English
  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác
  Tài liệu tham khảo
  Hiệu chỉnh
 
Số người truy cập: 107,090,628

 Highly Nickel‐Loaded γ‐Alumina Composites for a Radiofrequency‐Heated, Low‐Temperature CO2 Methanation Scheme
Tác giả hoặc Nhóm tác giả: Dr. Wei Wang, Dr. Cuong Duong‐Viet, Dr. Giulia Tuci, Prof. Yuefeng Liu, Dr. Andrea Rossin, Dr. Lapo Luconi, Dr. Jean‐Mario Nhut, Prof. Lam Nguyen‐Dinh, Dr. Giuliano Giambastiani, Dr. Cuong Pham‐Huu
Nơi đăng: ChemSusChem - Chemistry Europe - Wiley Online Library; Số: Volume13, Issue20;Từ->đến trang: 5468-5479;Năm: 2020
Lĩnh vực: Khoa học công nghệ; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
In this work, we joined highly Ni‐loaded γ‐Al2O3 composites, straightforwardly prepared by impregnation methods, with an induction heating setup suited to control, almost in real‐time, any temperature swing at the catalyst sites (i. e., “hot spots” ignition) caused by an exothermic reaction at the heart of the power‐to‐gas (P2G) chain: CO2 methanation. We have shown how the combination of a poor thermal conductor (γ‐Al2O3) as support for large and highly interconnected nickel aggregates together with a fast heat control of the temperature at the catalytic bed allow part of the extra‐heat generated by the reaction exothermicity to be reused for maintaining the catalyst under virtual isothermal conditions, hence reducing the reactor power supply. Most importantly, a highly efficient methanation scheme for substitute natural gas (SNG) production (X up 98 % with >99 % S) under operative temperatures (150–230 °C) much lower than those commonly required with traditional heating setup has been proposed. As far as sustainable and environmental issues are concerned, this approach re‐evaluates industrially attractive composites (and their large‐scale preparation methods) for application to key processes at the heart of P2G chain while providing robust catalysts for which risks associated to nano‐objects leaching phenomena are markedly reduced if not definitively suppressed.
ABSTRACT
In this work, we joined highly Ni‐loaded γ‐Al2O3 composites, straightforwardly prepared by impregnation methods, with an induction heating setup suited to control, almost in real‐time, any temperature swing at the catalyst sites (i. e., “hot spots” ignition) caused by an exothermic reaction at the heart of the power‐to‐gas (P2G) chain: CO2 methanation. We have shown how the combination of a poor thermal conductor (γ‐Al2O3) as support for large and highly interconnected nickel aggregates together with a fast heat control of the temperature at the catalytic bed allow part of the extra‐heat generated by the reaction exothermicity to be reused for maintaining the catalyst under virtual isothermal conditions, hence reducing the reactor power supply. Most importantly, a highly efficient methanation scheme for substitute natural gas (SNG) production (X up 98 % with >99 % S) under operative temperatures (150–230 °C) much lower than those commonly required with traditional heating setup has been proposed. As far as sustainable and environmental issues are concerned, this approach re‐evaluates industrially attractive composites (and their large‐scale preparation methods) for application to key processes at the heart of P2G chain while providing robust catalysts for which risks associated to nano‐objects leaching phenomena are markedly reduced if not definitively suppressed.
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn