Home
Giới thiệu
Tài khoản
Đăng nhập
Quên mật khẩu
Đổi mật khẩu
Đăng ký tạo tài khoản
Liệt kê
Công trình khoa học
Bài báo trong nước
Bài báo quốc tế
Sách và giáo trình
Thống kê
Công trình khoa học
Bài báo khoa học
Sách và giáo trình
Giáo sư
Phó giáo sư
Tiến sĩ
Thạc sĩ
Lĩnh vực nghiên cứu
Tìm kiếm
Cá nhân
Nội dung
Góp ý
Hiệu chỉnh lý lịch
Thông tin chung
English
Đề tài NC khoa học
Bài báo, báo cáo khoa học
Hướng dẫn Sau đại học
Sách và giáo trình
Các học phần và môn giảng dạy
Giải thưởng khoa học, Phát minh, sáng chế
Khen thưởng
Thông tin khác
Tài liệu tham khảo
Hiệu chỉnh
Số người truy cập: 107,062,451
Synthesis and preparation of hydrophobic CNTs-coated melamine formaldehyde foam by green and simple method for efficient oil/water separation
Tác giả hoặc Nhóm tác giả:
The-Anh Phan, Kim-Hoang Dang,
Lam Nguyen-Dinh
Nơi đăng:
CHEMISTRY & CHEMICAL TECHNOLOGY (JOURNAL);
S
ố:
Vol. 14, No. 4;
Từ->đến trang
: 531–537;
Năm:
2020
Lĩnh vực:
Khoa học công nghệ;
Loại:
Bài báo khoa học;
Thể loại:
Quốc tế
TÓM TẮT
Herein, we present a green, simple and cost-effective method to change hydrophilic melamine formaldehyde (MF) foam to hydrophobic carbon nanotubes (CNTs) coated MF foam through an immersion process. The MF foam was produced from the MF resin which was synthesized in a laboratory by a condensation reaction between melamine and formaldehyde under alkaline condition with a molar ratio of melamine to formaldehyde of 1:3. The MF foam has an open-cell structure with the average pore diameter of 350 mm, density of 25 kg·m-3 and porosity of 98 %. The as-prepared CNTs-coated MF foam exhibits high sorption capacity (23–66 g/g) for oils and organic solvents, good recyclability and high selectivity.
ABSTRACT
Herein, we present a green, simple and cost-effective method to change hydrophilic melamine formaldehyde (MF) foam to hydrophobic carbon nanotubes (CNTs) coated MF foam through an immersion process. The MF foam was produced from the MF resin which was synthesized in a laboratory by a condensation reaction between melamine and formaldehyde under alkaline condition with a molar ratio of melamine to formaldehyde of 1:3. The MF foam has an open-cell structure with the average pore diameter of 350 mm, density of 25 kg·m-3 and porosity of 98 %. The as-prepared CNTs-coated MF foam exhibits high sorption capacity (23–66 g/g) for oils and organic solvents, good recyclability and high selectivity.
© Đại học Đà Nẵng
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn