Thông tin chung

  English

  Đề tài NC khoa học
  Bài báo, báo cáo khoa học
  Hướng dẫn Sau đại học
  Sách và giáo trình
  Các học phần và môn giảng dạy
  Giải thưởng khoa học, Phát minh, sáng chế
  Khen thưởng
  Thông tin khác

  Tài liệu tham khảo

  Hiệu chỉnh

 
Số người truy cập: 51,401,769

 A Study on Combination of Two Friction Dampers to Control Stayed-cable Vibration under considering its Bending Stiffness
Tác giả hoặc Nhóm tác giả: Nguyen D.T., Vo D.H.
Nơi đăng: Lecture Notes in Civil Engineering (Scopus-accepted); Số: -;Từ->đến trang: -;Năm: 2019
Lĩnh vực: Kỹ thuật; Loại: Bài báo khoa học; Thể loại: Quốc tế
TÓM TẮT
ABSTRACT
The stayed-cable is one of vital component of cable-stayed bridges. Stayed-cable is often very long with a small diameter and low mass, which can be considered horizontal flexible structure with very low natural frequency. Under the influence of cyclic load in specific conditions, stayed-cable can store the energy and vibrate with large amplitude. This paper focuses on studying the methods of two-friction damper combination for reducing the cable vibration, and evaluates the capacity of friction-damper parameters in mitigating the vibration of stayed-cable. The results show the relationship between the damping factor of stayed-cable and various parameters such as Equivalent viscous constants, friction, spring constant, points attached damper to stayed-cable. For long-span cable-stayed bridges, cable has relatively large diameter and it is normally covered by grouting mortar or Epoxy. Consequently, its bending stiffness is considerably increased. Therefore, it is necessary to take into account its bending stiffness during the vibration analysis process. From these results, designers can assess and choose the attaching point as well as parameters of friction damper, which are optimal for specific stayed-cable.
© Đại học Đà Nẵng
 
 
Địa chỉ: 41 Lê Duẩn Thành phố Đà Nẵng
Điện thoại: (84) 0236 3822 041 ; Email: dhdn@ac.udn.vn